Antifreeze -80 (G12) NANOPROTEC

Antifreeze -80 (G12) NANOPROTEC

Buyer Rates (5/5):
rating
21.20€
5.80€
  • Brands NANOPROTEC
  • Product Code: NP 3201 504
  • Availability: In Stock
4L 1L
NANOPROTEC ANTIFREEZE -80 (G12) cooling fluid
Antifreeze -80 (G12) is designed for year-round protection of the radiator against temperature drops and corrosion. The concentrate can be used for all cooling systems, especially for aluminium engines. It protects against freezing, corrosion and engine overheating. Antifreeze -80 (G12) does not contain nitrites, amines, phosphates, silicates; and it is an antifreeze corrosion inhibitor. It is used in engines of cars and trucks as radiator antifreeze compound. The concentrate conforms to the latest requirements of car manufacturers.
Thanks to specially designed additives, Antifreeze -80 (G12) is excellent for motors made of aluminium, light metal and grey cast iron (follow the manufacturer's instructions).
Features:
•  Protects all steel, cast iron, aluminium, copper parts of the cooling system against corrosion
•  Reduces the chance of cavitation damage, for example, in a coolant pump
•  Non-aggressive to varnishes
•  Non-aggressive to hoses and gaskets
•  Reduces the chance of deposits causing clogging of the cooling system
•  Prevents foaming
Application:
The concentrate is made of monoethylene glycol, and is mixed only with deionized or ordinary potable water. Before the first filling, it is necessary to dry the cooling system and rinse it thoroughly with warm water. The concentration ratio of antifreeze depends on the required level of freezing resistance.
Mixing table:
Antifreeze -80(G12), % Water, % t freezing,  C 
                               50           50          -38 °C 
                               68           32          -69 °C 
! Follow the manufacturer's instructions! Do not mix with other brands of antifreeze. Before use, read the car's operation manual to determine the frequency of fluid replacement.

Physical and chemical characteristics :
Specific gravity at 20  C, kg/m³             1.110 to 1.140 
COC flash point, °C                              >120 
Boiling point,  °C                                    165
pH value, (33 Vol.%)                             7,5-8,5 
Water content, 0%                               <5 
Foaming                                             conforms
Pour Point at 1:1 dilution of concentrate with water, °C -38 
Colour                                             Red 

We recommend this product for:

AFNOR 

NF-R 15-601 Type 1 

AS 

2108  

ASTM 

D 3306 Type I 

BS 

6580  

 CUNA 

NC 956-16  

JIS 

K 2234  

ÖNORM 

V 5123  

SAE 

J 1034  

UNE 

26-361  

Write a review

Note: HTML is not translated!
    Bad           Good