SET NANOPROTEC G-ENGINE 3 in 1

SET NANOPROTEC G-ENGINE 3 in 1

Buyer Rates (5/5):
rating
76.00€
  • Brands NANOPROTEC
  • Product Code: ST 1100 003
  • Availability: In Stock
pkg

Purpose:

SET NANOPROTEC G-ENGINE 3 IN 1 protective complex is designed for treatment PETROL and GAS engines of vehicles and small trucks during normal operation.

Efficiency of SET NANOPROTEC G-ENGINE 3 IN 1

As a result of using SET NANOPROTEC G-ENGINE 3 IN 1: 

  The friction surfaces will be cleaned of varnishes and deposits already at the first stage of treatment, and so-called “uncoking” of piston rings and restoration of their mobility will also occur.

  Compression will increase to nominal values, this effect is achieved when a new micron layer is formed and gaps are compacted in the rubbing surfaces of the piston-cylinder group.

  Engine life will increase up to 200%, due to the increased wear time of the parts.

  Fuel consumption is significantly reduced — compression is normalized, and the quality of fuel combustion is improved.

  Significantly reduced oil consumption for waste because the fit of the oil scraper rings is improved.

  Due to the general reduction in friction losses, the effective engine power will be restored up to the nominal values.

  After treatment with a protective composite, the noise performance of the engine will decrease due to damping with a more dense layer of oil film when shifting the pistons.

  The functional properties of hydraulic lifters will be restored.

  There will be an opportunity to use the engine in conditions of oil starvation for a short time.


! Complete instructions for product use are described in the individual PROTECTIVE COMPOSITE NANOPROTEC G-ENGINE packaging (by piece).

Write a review

Note: HTML is not translated!
    Bad           Good